For rooms with a distance between 14m and 22m: 400mm x 150mm sized fire exit signs.For rooms with a smaller distance than 14m: 300mm x 100mm sized fire exit signs.The following is a guide to the recommended sign sizes to use for your room space: Green fire signage indicates a fire exit or evacuation route while blue fire signage shows mandatory actions that must be taken to maintain fire safety. For more information please also refer to our separate guide on where to fit fire exit signs.įire exit signs are either green, blue or a combination. It’s important to note, signs should not be fitted onto doors or where they could not be seen if the door is opened. Fire exit signs should be fitted as close to the centre line of the escape route as possible For example, above the door in the centre. If you need to put the fire exit signs higher, then you may need to select bigger signs to ensure they can still be seen. Fire exit signs above doors or open spaces are ideally fitted between 1.8m to 2.5m in height so that they are visible at all times. Where should fire exit signs be positioned?įire exit signs can be positioned on walls, suspended from ceilings, and fixed above doors - depending on where they are needed and the best way to make them completely visible to people using them. Below are the commonly used British Standards options: For example, British standards and European standards should not be mixed. These signs are of utmost importance and should take precedence over all other signs.ĭifferent types of fire exit signs should be avoided as this can cause confusion to people using them. The only fire exit sign that doesn’t require directional arrows, is the final sign above the door and access out, which must state ‘Exit’ or ‘Fire Exit’. The signs should identify the primary escape route which is normally the shortest distance to a place of safety. This ensures that a person moving within the building is advanced towards the final exit. As a simple guide - wherever you are in a building - you should be able to clearly see a fire exit sign.Īll fire exit signs that lead towards the fire exit, itself, should be directional. Signs will also need to be placed above all doors and junctions to eliminate ambiguity. This covers changes in direction in spots such as corridors and stairs, as well as open spaces if there are multiple options and any chance of confusion. Alternatively, if you have a more complex space then you will need a greater number of signs to mark each and every change in direction in the route to a fire exit. If the given space is very small, then you may only need one fire exit sign above the door if this is the only way out. The quantity required will vary depending on the size and layout of your building. The former highlights the need for fire signage and where it should be placed, while the latter requires businesses to carry out a risk assessment and ensure fire safety measures, including signs, are assessed, implemented and maintained.įire exit signs should be placed in all relevant locations within a property. What are the regulations on fire exit signs?īoth the Health and Safety (Safety Signs and Signals) Regulations 1996 (HSR) and the Regulatory Reform (Fire Safety Order) 2005 (RRFSO) apply to fire exit signs. This type of bold and clear signage is paramount in commercial buildings to ensure people can easily see the quickest route to safety. They can help save lives should there be a fire or other emergency on your premises.įire Exit Signs are green and white in colour and often contain directional arrows to indicate which direction to proceed. Fire Exit Signs provide essential information around the exit locations of a building.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |